Adjusting Top Thread Tension; Changing Presser Foot - Singer XL-580 Manual De Instrucciones

ADJUSTING TOP THREAD TENSION

The correct appearance of your stitching is largely determined
by the balanced tension of both top and bobbin threads. The
middle of layers of the fabric you are sewing.
only after you have determined that the machine is correctly
usually only desirable for straight stitch sewing.
For zigzag sewing, satin stitch and decorative stitch functions,
thread tension should be less than that for straight stitch
sewing.
It is recommended to decrease thread tension for buttonholes.
You will always obtain a nicer stitch and less puckering when
the upper thread appears slightly on the bottom side of your
fabric.

CHANGING PRESSER FOOT

Be sure the needle is in the highest position. Raise presser
foot lifter.
1. Push presser foot release button to remove the foot.
2. Place the desired foot on the needle plate aligning the
presser foot pin with the foot holder.
3. Lower the presser foot lifter so that the foot holder snaps
on the foot.
22
Under side
Reverso
Correct
Top side
Cara
Top stitch too tight
Puntada superior
demasiado apretada
2
Top stitch too loose
Puntada superior
Increase tension
Presser foot lifter
Levier de verrouillage du pied
Palanca pie prensatelas
3
1
Foot release button
Touche de verrouillage du pied
Boton de desprendimiento
prensatelas
Foot holder