Idiomas disponibles
Idiomas disponibles
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
TROUBLESHOOTING.
PROBLEM
The wet/dry vacuum will not
operate.
The dust comes out from
the motor cover.
motor/speed vibration.
Filter cleaning operation
fails.
TROUBLESHOOTING
POSSIBLE CAUSE
No power supply.
Faulty power cord.
Collection tank is full.
Switch in the wrong position.
damaged.
Vacuum has been used to collect
There are blockages in the nozzle,
hose, or the collection tank inlet.
dust.
Air leakage from the end of the
hose nozzle.
The drain cap is not tightened.
replaced.
Check the power supply, cord,
breakers and fuses.
Unplug and check the power
cord. If damaged, have it
repaired by a professional.
Empty the collection tank.
Press the ON 'I' button on the
powerhead.
Attach or replace the cartridge
Remove the standard cartridge
Unplug and check nozzle, hose
and collection tank inlet for
blockages.
Ensure that the end of the hose
nozzle is completely sealed.
properly.
Replace with a new cartridge
17
SOLUTION
