Donner MEDO Manual De Usuario página 5

Function
Enable Loop recording
After enabling the Loop recording, enter
the loop function
Stop recording
Play/Pause Loop
Clear the loop for the current voice mode
Clear the loop for all modes
Change BPM
Octave up
Octave down
Next mode
Switch to Drum
Switch to Bass
Switch to Chord
Switch to Lead
Switch to Sample
Volume-per-part
Activate/Deactivate Metronome
Corresponding buttons
+PAD 13 (Rec)
+PAD 13 (Rec)
+PAD9(Play/Pause)
Press and hold + Pad 13 (Rec) until a
series of red lights run from PAD1 to PAD8
to complete the current track clearance
Press and hold + Pad 13 (Rec) and shake
MEDO
Press and hold , and continuously tap
PAD 14 (BPM) at the required tempo for at
least three times
Press and hold + Pad 11 (octave) and slide
to the right
Press and hold + Pad 11(octave) and slide
to the left
+Drum（PAD1）
+Bass（PAD2）
+Chord（PAD3）
+Lead（PAD4）
+Sample（PAD5）
To adjust the individual volume for Drum,
Bass, Chord, Lead, and sample, First, press
and hold the button
select the track you want to adjust from
PAD1 to PAD5. Finally, press the volume
control to adjust the track volume. For
example, to decrease the volume of the
BASS track: first, press and hold the button
without releasing it, then single-click
PAD2 to select the BASS track, and finally
press the volume down button to adjust the
volume of the single track.
In recording mode, press and hold
for 2 seconds
5
ENGLISH
. Then, single-click to
+ BPM