Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
ORCHESTR A OF LIGHTS
SAFETY WARNING:
be discarded.
SAVE THESE INSTRUCTIONS –
instructions for power units.
WARNING
ELECTRIC PRODUCT. Keep away from children. As with all electrical products, precautions should be observed
during handling and use to reduce the risk of electric shock. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
WARNING
Strobe lights have been known to trigger seizures in people with photosensitive epilepsy.
WARNING
The light is very bright. Do not shine directly into eyes.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING(THIS FURNISHING)
WARNING: TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK
OR INJURY TO PERSONS ：
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
1. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
2. Do not let lamps rest on the supply cord or on any wire.
3. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
4. Do not cover the product with cloth, paper or any material not part of the product when in use.
5. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor
applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified
electrician for proper installation.
6. This seasonal use product is not intended for permanent installation or use.
7 . Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
8. Unplug the product when leaving the house, when retiring for the night, or if left unattended.
9. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with
or placed where small children can reach it.
10. Do not use this product for other than its intended use.
11. Do not hang ornaments or other objects from cord, wire, or light string.
12. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace
the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product.If the
replacement fuse blows, a short-circuit may be present and the product should be discarded.
13. This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug
will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace.
14. Read and follow all instructions that are on the product or provided with the product.
Remove all plastic fasteners and tags. These are part of the packaging and should
This manual contains important safety and operating
E-1
E
TM
Manuales relacionados para Gemmy ORCHESTRA OF LIGHTS 883104
Resumen de contenidos para Gemmy ORCHESTRA OF LIGHTS 883104
- Página 1 ORCHESTR A OF LIGHTS SAFETY WARNING: Remove all plastic fasteners and tags. These are part of the packaging and should be discarded. SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for power units. WARNING ELECTRIC PRODUCT. Keep away from children. As with all electrical products, precautions should be observed during handling and use to reduce the risk of electric shock.
- Página 2 CAUTION: To reduce the risk of fire and electric shock: 1. Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal. 2. Do not mount or support wires in a manner that can cut or damage wire insulation. SAVE THESE INSTRUCTIONS.
- Página 3 1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord. 2. Open fuse cover. Slide open the fuse access cover on top of the attachment plug towards blades. (See illustration) 3.
- Página 4 This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. THESE INSTRUCTIONS ARE FOR THESE ITEMS 883104 113744 116413 116932 QD ID：XXXXXX Visit for more information. WWW.GEMMY.COM ©2024 GEMMY INDUSTRIES CORP. 117 WRANGLER DRIVE. SUITE 100 COPPELL, TX 75019 U.S.A. 1 (800) 274-6717 MADE IN CAMBODIA PRINTED IN CAMBODIA...
- Página 5 ORCHESTR A OF LIGHTS ADVERTENCIA DE SEGURIDAD: Remueva todos los amarres y etiquetas plásticos. Son parte del empaque y deben descartarse. GUARDE ESTAS INSTRUCCIONES - Este manual contiene importantes instrucciones de seguridad y funcionamiento para unidades eléctricas. ADVERTENCIA PRODUCTO ELÉCTRICO. Manténgalo alejado de los niños. Al igual que con todos los aparatos eléctricos, se deben tomar precauciones durante el manejo y el uso para reducir el peligro de electrocución.
- Página 6 1. No instale en árboles que tengan agujas, hojas o cubiertas de ramas de metal o de materiales con apariencia metálica. 2. No monte o apoye los cables de una manera en la que puedan cortar o dañar el aislamiento del cable. GUARDE ESTAS INSTRUCCIONES.
- Página 7 INSTRUCCIONES DE SERVICIO DEL USUARIO Reemplazo del fusible (Fusible: 2pzs) Fusible ADVERTENCIA: actif Peligro de incendio: Reemplace solamente con el mismo tipo y tamaño de fusible. ADVERTENCIA: Fusible de Peligro de incendio: No reemplace la clavija de remplacement conexión. Contiene un dispositivo de seguridad (fusible) que no se debe eliminar.
- Página 8 ESTAS INSTRUCCIONES SON PARA ESTOS PRODUCTOS 883104 113744 116413 116932 QD ID: XXXXXX para más información. Visit WWW.GEMMY.COM ©2024 GEMMY INDUSTRIES CORP. 117 WRANGLER DRIVE. SUITE 100 COPPELL, TX 75019 U.S.A. 1 (800) 274-6717 HECHO EN CAMBOYA IMPRENTO EN CAMBOYA...
- Página 9 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.