Idiomas disponibles
Idiomas disponibles
4.1.2 Operation of the DSHasciSE
The DSHasciSE is suitable for charging two HasciSE.
Connection power
supply pack
Figure 10: Side of DSHasciSE
The connection on the left hand side is suitable for the power supply pack.
Plug the power cord into the power supply pack. Plug the power cord into the power plug. Plug the low
tension connector of the power supply pack into the plug socket at the left hand side of the DSHasciSE (see
Figure 10). The charging station is now ready for operation.
Disconnection of the equipment from the line voltage is done by
pulling the mains plug.
NOTE
Non-designated use of the interfaces is prohibited.
ATTENTION
Make sure there is no risk of stumbling over connection cables or
power packs.
ATTENTION
HasciSE_Accessories_Accesorios_Brief Overview_Resumen breve _FCC_V1.10
8 / 34
