Idiomas disponibles
Idiomas disponibles
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and using the hob, a minimum of 50mm space
shall be preserved around the cut out.
Ensure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material to avoid larger deformation caused by
the heat radiation from the hotplate.
L(mm)
W(mm)
590
520
It is important that you ensure the ceramic hob is in a well ventilated position and
the air inlet and outlet are not blocked. Ensure the ceramic hob is in good working
order and that the glass plate and the supply cord are not damaged.
H(mm)
D(mm)
55
51
21
A(mm)
B(mm)
560
490
X(mm)
50 mini
