Idiomas disponibles
Idiomas disponibles
As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015.
1
Do not install the machine on unstable tables and shelves. The product might fall in that case.
2
Please insert the power plug completely into the power socket and ensure that the power plug is placed in an accessible
3
position.
Do not pull the power cable itself. When pulling out the power cord, please hold the plug instead of the cable.
4
When the machine is moved from a low temperature environment to a high temperature environment, condensation
5
may occur inside the machine. Please do not turn it on immediately.
In case of any abnormality or malfunction, such as no image, no sound, smoking or unusual odor, please disconnect
6
the power supply immediately, unplug and contact our after-sales service personnel to open the machine for inspection.
7
Do not block the air vent and install the machine in a well-ventilated place to prevent the machine from overheating.
Do not use flammable materials such as books or cardboard to block the light beam emitted by the machine.
8
Flammable materials may melt or ignite objects or even cause fire when exposed to the light beam for a long time.
9
Do not place the machine directly in areas with poor ventilation such as carpets, cushions, bookshelves or closets.
To facilitate ventilation, please ensure that the distance between the ventilation opening of the machine and the
10
wall is greater than 30cm.
11
Do not place flammable spray or other flammable substances beside this machine.
If there is a gas leak, please do not touch or switch the socket. Open the window immediately for ventilation.
12
Precautions
EN
20
