Idiomas disponibles
Idiomas disponibles
WARNING:
or missing, DO NOT attempt to attach the
battery or operate the tool until the broken
or missing part is replaced. Failure to do
so could result in possible serious injury.
WARNING:
modify this tool or create accessories not
recommended for use with this tool. Any
such alteration or modification is misuse
and could result in a hazardous condition
leading to possible serious injury.
WARNING:
be connected to the battery when you are
assembling parts, making adjustments,
installing or removing blades, cleaning, or
when it is not in use. Disconnecting the
tool will prevent accidental starting, which
could cause serious personal injury.
TO ATTACH BATTERY
FIG. 1
Make sure that the sander is switched
off. Align the raised rib on the battery pack
with the grooves on the sander, and then
10
slide the battery pack onto the sander.
If any part is broken
Do not attempt to
Your tool should never
PACK (FIG. 1)
Release Button
ASSEMBLY
1. Carefully remove the tool
2. Inspect the tool carefully to
3. Do not discard the packing
ASSEMBLY
NOTICE: Make sure that the latch
on the battery pack snaps into place
and the battery pack is secured to
the sander before operation.
Attach
1. Make sure that the sander is
2. Depress the battery-release
Detach
3. Pull the battery pack out and
UNPACKING
and any accessories from the
carton. Make sure that all items
listed in the packing list are
included.
make sure that no breakage or
damage occurred during
shipping.
material until you have
carefully inspected and
satisfactorily operated the tool.
TO DETACH BATTERY
PACK (FIG. 1)
switched off.
buttons located on the front of the
battery pack to release the battery
pack.
remove it from the sander.
