General System Information; Start-Up; Direct Pairing - HomeMatic IP HmIP-WTH-B-2 Manual De Instalacion Y Uso

General system information

Display overview:
Setpoint/actual temperature
Humidity
Open window symbol
Battery symbol
Radio transmission
Boost function
Manual operation*
Automatic mode*
Holiday mode*
Heating
Cooling
Operating lock*
Setpoint temperature
Overview of heating phases
Time and date*
Offset temperature*
Programming a heating
profile*
Days of the week
* (see „7 Configuration menu" on page
32)
Figure 2
5 General system information
This device is part of the climate con-
trol solution of Homematic IP and
works with the Homematic IP radio
protocol. All devices of the climate
control solution can be configured
comfortably and individually with a
smartphone via the Homematic IP app.
The available functions provided by the
Homematic IP system in combination
with other components are described
in the Homematic IP User Guide. All
current technical documents and up-
dates are provided at
www.homematic-ip.com.

6 Start-up

Please read this entire section
before starting the pairing proce-
dure.
For more information on teaching
and setting up the wall thermostat
using a CCU3, please refer to the
WebUI manual on our homepage
at www.homematic-ip.com.
The wall thermostat must first be
added in order to be able to com-
municate with other devices in your
system. To control your heating, you
can teach the wall thermostat to the
Homematic IP Access Point as de-
scribed in (see „6.2 Pairing to the
Homematic IP Access Point" on page
28).
6.1

Direct pairing

You can connect the
Homematic IP Wall Thermostat to
a Homematic IP Floor Heating
Actuator (HmIP-FALx-Cx,
HmIP-FALMOT-Cx), a
Homematic IP Radiator Thermos-
tat – basic (HmIP-eTRV-B/
HmIP-eTRV-B-2/ HmIP-eTRV-B-A)
or a Homematic IP Window- and
Door Contact with magnet
(HmIP-SWDM/HmIP-SWDM-2).
Please make sure you maintain a
distance of at least 50 cm bet-
ween the devices.
26