Idiomas disponibles
Idiomas disponibles
E Instructions
1. Safety information
2. Specifications
3. General troubleshooting
4. How to use the vacuum
5. Use of the accessories
6. Maintenance
6.1. HEPA filter & foam filter maintenance
6.2. Maintaining the collection container
6.3. Maintaining the electric clipper
7. Storage
7.1. Storing the flexible hose
7.2. Storing the power cord
1. Safety information
• This product may only be used for domestic purposes and not for com-
mercial or industrial purposes. This product must also not be used out-
doors or in a damp environment.
• Be especially careful when using this product around children and pets.
Please do not allow children or pets to play with this product.
• Dispose of all packaging materials properly. Keep away from children
and pets.
• Do not use or store this product in damp places such as outdoors or in
bathrooms.
• Do not touch the power plug or this product with wet hands.
• Do not use this product to vacuum up wet hair or liquids.
• Do not use this product if the power cord or the plug is damaged.
• Do not disassemble this product yourself. Incorrect assembly can lead
to electric shock or fire. Please contact the manufacturer if repairs are
necessary.
• Never use this product to vacuum flammable or combustible liquids
such as gasoline. Do not use this product to vacuum up hot or flamma-
ble objects such as cigarettes, matches, hot soot, etc., as this may cause
fires and explosions.
• Do not use the product in or near environments where flammable or
combustible gases or liquids are present.
• Do not pull on the power cord. Do not place any heavy objects on the
product.
• Do not insert your fingers or other body parts into the suction opening.
Do not insert foreign objects such as plastic bags into the suction ope-
ning to avoid injury or product failure.
• Do not use chemical products with aroma substances and fragrances
on the filter, otherwise there is the risk of fire.
• Clean the collection container and the filters regularly, otherwise this
may lead to product failure or accidents.
• Before cleaning and maintenance, disconnect the appliance from the
power supply and pull out the mains plug. Otherwise, there is a risk of
electric shock, accidents and injuries.
• This product has a function that interrupts operation if the temperature
rises abnormally. If the motor heats up abnormally, stop using it imme-
diately and switch off the appliance. If the suction opening is blocked,
stop using the appliance immediately and switch it off. Remove the col-
lection container, make sure that the suction opening and the filters are
clean and restart the appliance after 60 minutes.
• Make sure that the filters are correctly installed for the device to work.
Using the appliance without filters can lead to appliance failure.
• Pay attention to the sharp edges on the accessories to avoid injury. The
blades of some accessories (e.g. detangling tool and electric clipper)
have been sharpened for functional reasons. Always pay attention to
safety when using this product.
• The flexible hose contains electrical wires and must not be used to va-
cuum up water or be immersed in water for cleaning. Check the hose
regularly and stop using it if it is damaged.
8
2. Specifications
Product Name: Clipper Set with fur vacuum/#23850
Model: PG100
Power supply: 220–240 V, 50/60 Hz
Power: 600 W
Length of flexible hose: 1.5 m
Length of mains cable: 1.65 m
Collection container capacity: 2 liters
Vacuum dimensions: 320 mm × 160 mm × 225 mm (L × W × H)
Weight: 2 kg
3. General troubleshooting
Error: The appliance cannot be switched on.
Possible causes of error: The mains cable is not connected or the
mains socket is not supplied with power.
Suggested solution: Check whether the mains cable is plugged in and
whether the mains socket is supplied with power.
Error: Low suction power.
Possible cause of error: The hose is clogged.
Suggested solution: Check whether the hose is clogged.
Possible cause of error: The collection container is full.
Suggested solution: Empty the collection container.
Possible cause of error: The HEPA filter or the foam filter is too dirty.
Suggested solution: Clean HEPA filter or foam filter.
Possible cause of error: The collection container or the accessories
are not installed correctly.
Suggested solution: Check that the collection container or the
accessories are installed according to the user manual.
Possible cause of error: Accessories are clogged with hair.
Suggested solution: Clean the accessories immediately and remove
any hair.
Note: If the above measures do not solve the problem, please stop using
the product and contact customer service for help.
