Idiomas disponibles
Idiomas disponibles
WARNING
Electrical Shock and Personal
Injury Hazard
Wrapping the cord too tightly
puts stress on the cord and
can cause cord damage. A
damaged cord is an electrical
shock hazard and could cause
personal injury or damage.
1. Clean the attachments
thoroughly before storing.
Place attachments in the
accessory bag.
2. Gather the cord and wrap it
It is recommended to clean tools
with water after each use.
NOTE:
When the tools are
worn or broken, replace the tools.
To purchase tools, call 1-877-531-
7321 (US) / 1-844-608-3081 (CA).
1. Press the tool release button to
remove the tool from the hose.
Tool Release
Button
2. Pull up the cover release tab on
CARPET CLEANER STORAGE
CLEANING TOOLS
loosely around the cord hooks.
Lock plug retainer onto the
power cord.
3. Empty the clean water tank.
Rinse it out before placing back
on the unit. Open the clean
water tank cap to allow it to air
dry.
4 Empty the dirty water tank
then rinse, clean and dry before
placing back on the unit. The
wide tank opening is designed
to fit your hand inside to
thoroughly clean, rinse and dry.
5. Store the carpet cleaner in
a dry, indoor area at room
temperature.
the tool and pull off tool cover.
Remove the insert by pulling it
off with force, if necessary.
Cover
Release
Tab
Insert
3. Rinse thoroughly with clean
water. Allow the parts to dry
before storing.
4. Reinstall the tool cover and the
insert back into place until a
click is heard.
- 19 -
