Troubleshooting - Kobold EBB100 Manual De Instrucciones

CAUTION
Risk of injury from moving parts!
Moving parts (such as the rotating brushes or oscillating cloth holder) could cause
injury.
• Always switch the device off before all retrofitting, cleaning and maintenance
work.
• Disconnect the accessory head from the device before performing retrofitting,
cleaning or maintenance work on the accessory head.
• Stay clear of the moving parts.
• Never reach into the rotating components.
Fault
The LED display on the
cordless vacuum cleaner
lights up yellow.
The Kobold electric brush is
too loud.
9

Troubleshooting

Possible cause and solutions
The suction duct of the electric brush may be blocked.
– Open the inspection flap (1) on the underside of the electric
brush.
– Remove the blockage.
– If necessary, use an appropriate object to do this (e.g. crochet
needle).
– Put the inspection flap (1) back on.
The roller brushes may not be correctly inserted.
– Check whether the roller brushes are correctly inserted.
– Always replace both brushes together.
It may that original Kobold accessories were not used; this can lead
to bearing and motor damage.
– Use original Kobold roller brushes only.
An object may have become stuck in the area of the roller brushes.
– Remove the object.
37