Idiomas disponibles
Idiomas disponibles
GB
User Manual
Thank you for purchasing the Juna wireless soundbar.
The soundbar offers the option of receiving music
wirelessly and has a USB port, micro SD card slot, AUX
port and radio function.
Please read the operating instructions carefully and
follow the safety instructions.
Package contents:
• Soundbar Juna
• Micro USB charging cable
• 3.5 mm audio cable
• User Manual
Overview:
1
2
10
9
1. Play/pause the current playback. TWS.
Search and save FM radio stations (FM mode).
2. Reduce volume. Play the previous track or saved
radio station (FM mode).
3. Increase volume. Play the next track or a saved
radio station (FM mode).
4. Playback source mode button, light mode switch.
5. Status LED
6. Charging connection
7. MicroSD card slot
8. USB connection
9. AUX connection (3.5 mm)
10. ON/OFF switch
Starting up
Charging the soundbar
Juna is equipped with an internal, rechargeable battery.
Connect the micro USB cable, which is included in the
7
3
4
8
7
6
5
scope of delivery, to the micro USB charging port (6) of
the Juna. The USB plug of the cable can be connected
to a computer or standard USB power supply.
The status LED (5) lights up during the charging
process. The usual charging time is approx. 4 hours.
Once fully charged, the status LED goes out.
The cable can now be disconnected from the Juna.
Switching on/off
To switch on, set the On/Off switch (10) to „ON".
To switch off, set the On/Off switch (10) to „OFF".
Bluetooth
®
connection
The Juna Soundbar must be paired with a Bluetooth
enabled device before it can be used for wireless music
streaming.
Note: Please note that different pairing methods are
used for different cell phones.
1. Switch on the speaker by setting the on/off switch
(10) to „ON".
®
2. Search for Bluetooth
audio devices with your
Bluetooth
®
device from which audio data is to be
played.
3. The searching Bluetooth
the „Juna" loudspeaker.
4. Confirm the pairing with „Juna". Enter „0000" if you
are asked for a code.
If you are not sure how to pair your Bluetooth
please refer to the operating instructions for the device.
®
When using a Bluetooth
device without a display,
switch it to pairing or connection mode and wait a few
seconds until the connection with the speaker has been
established.
TWS function
(Connection of two Juna speakers)
Connect two Juna speakers together to get an
impressive and explosive sound experience of wirelessly
transmitted music.
To connect two speakers together, switch on both
devices and switch to Bluetooth
Mode button
. Once both speakers are in Bluetooth
mode, press and hold the Play/Pause button
you hear a confirmation that the two speakers have
GB
®
®
indicates that it has found
®
device,
®
mode by pressing the
until
®
8
