Idiomas disponibles
Idiomas disponibles
can use the power optimally.
Do not use recipients with a rough base
to avoid scratching the thermal surface of
the top.
A very important factor in induction cooking
is the dimension of the pot compared to
the plate used (Fig.7).
The cooking zones allow the use of
recipients with bases of various diameters.
It is, however, preferable to use the
appropriate cooking zone for the dimension
of the pot.
COOKING ZONE
DIAMETER
Ø 145 mm
Ø 210 mm
USE (Fig.8)
C
B
0
E
G
F
A- ON/OFF key > switch the appliance on
and off
B- Lock key > activate control panel lock /
child lock
C- Stop & Go key > pause mode
D- Clock key > allows you to set the timer
E- Cooking zone keys > selecting the
cooking zone
F- Plus (+) / Minus (-) keys > reduces /
increases the power and the timer
G- Display cooking zones > shows the
power of the respective zone
H- Timer display > shows the set value
SWITCHING THE HOB ON
To switch on the appliance, press the
, the displays (areas G) will switch
button
on in standby position 0.
The command will remain active for 10
seconds. If no cooking zone is selected
within this period, the hob will automatically
MINIMUM PAN
DIAMETER
90 mm
130 mm
H
D
A
00
0
F
G
E
switch off.
SWITCHING THE COOKING ZONE
ON
To select the desired cooking zone, press
the relevant E keys (
10 sec., pressing the
adjust the power. The power of the single
cooking zone can be adjusted in 9 different
positions, and will be on the relative
luminous display (area G) with a number
from "1 to 9".
QUICK HEATING/POWER BOOST
This function further reduces the cooking
time of a given zone by bringing the
temperature to maximum power for an
interval of 10 minutes. At the end of
this interval, the cooking zone power
automatically returns to level 9.
The use of this function is suitable for
heating large quantities of liquids (eg water
for cooking pasta) or dishes in a very short
time. To activate this function, select the
cooking zone and press the
level 9. Press the
signal will sound and the
appear on the zone display.
RESIDUAL HEAT
If the temperature of the cooking area is still
high (over 60°) after it has been switched
off, the relative display will indicate the
symbol (residual heat). The symbol will
only switch off when the burn risk in no
longer present.
POT DETECTION
If the symbol
the cooking area displays, it means that:
1) The recipient being used is not suitable
for induction cooking.
2) The diameter of the recipient used is
inferior to that allowed by the appliance.
3) No recipient is present.
TIMER
This function allows you to set the time
(from
to
switch off of the selected cooking zone.
Select a cooking zone by pressing one of
15
or
) and within
or
key up to
key again. An acoustic
symbol will
should appear on one of
minutes) to automatically
keys, to
