START TIME: hours:minutes in which you want to start the event.
-
-
DURATION: (for PVR mode only) duration of recording.
CHANNEL: (only in PLAY and PVR mode) channel to be recorded or played back in this event.
-
-
LANGUAGE: allows you to set the desired languages for channel audio, subtitles and EPG.
AV SETTINGS: allows you to configure the picture (RESOLUTION, ASPECT RATIO, ASPECT MODE and
-
TV-SCART) and audio parameters (VOLUME SCOPE allows the volume to be applied to each channel
independently or to be applied to all channels, SPDIF/HDMI).
-
LOCK CONTROL: MENU LOCK (activates/deactivates the menu lock), CHANNEL LOCK (activates/
deactivates the lock of marked channels in the CHANNELS > TV/RADIO CHANNEL LIST menu by
pressing 4 (LOCK)) and CHANGE PASSWORD (allows you to change the set password).
-
OSD SETTINGS: OSD graphics settings: TRANSPARENCY, OSD DURATION and CHANNEL CHANNEL.
PICTURE SETTINGS: allows you to configure the image parameters: BRIGHTNESS, COLOUR and
-
CONTRAST.
-
PANEL SETTINGS: setting of front panel LEDs:
LED BRIGHTNESS: display brightness.
-
-
INFO TO DISPLAY (START UP): adjuts what the display will show when the receiver is on: CH NO
(CHANNEL) or TIME.
-
SHOWTIME (STANDBY): activates/deactivates the display of the time on the screen when the
receiver is in StandBy mode: ON or OFF.
NETWORK SETTINGS: internet network configuration A RT5370 Wi-Fi adapter must be connected.
-
INSTALLATION
-
ANTENNA SETTINGS/DRIVER SETTINGS/LIST OF SATELLITES/LIST OF TP: allow you to add new
channels to the list. Depending on the type of search you wish to perform you will need to use the menu
options ANTENNA SETTINGS, LIST OF SATELLITE or LIST OF TP, configure the options displayed and
press the blue button to SEARCH.
- 7 -
EN