Idiomas disponibles
Idiomas disponibles
19. Regularly check all parts for wear or cracks.
20. Keep these operating instructions for future reference.
21. Ensure that the high chair is assembled by an adult.
22. Do not move or lift the chair with the child inside.
23. Do not place a chair near a window. This can cause injury or death.
24. Use only the original accessories supplied.
25. The product is not intended for sleeping.
02. CONTENTS OF THE KIT
SEE FIG. A
1. Seat
2. Double tray
3. Armrest
4. Leg rest
5. Footstool
6. Basis
7. Castors
8. Basket
03. MONTAGE:
Basis:
1. Remove all the parts from the box and lay them out on a flat surface.
2. Remove the plastic caps from the tubes attached to the seat.
3. Take the base and insert the tubes from the seat into the holes in the base. SEE FIG. B.1. Note: Make sure the direction of the base is correct. SEE
FIG. B.2
4. When the button on the tube coincides with the hole in the base you will hear a "click" sound indicating that the tube has been fitted correctly.
5. Repeat for both tubes in both bases.
Castors:
6. Lift the chair up and find the hole that is on the underside of the base. Insert the castors into the hole. SEE FIG. B.3
7. Repeat the activity for both circles in both bases.
Unfolding the chair:
8. Then stand the chair on castors. SEE FIG. B.4
9. Press both buttons on the back tube SEE FIG. B.5 and move them down until you hear a "click" sound on both tubes SEE FIG. B.6 If you are not sure
that the position is locked, try gently lifting the buttons up without pressing on them. If the buttons do not lift it means that the chair is locked in
this position.
Armrests:
10. Take the armrest and place it in the corresponding position as shown in FIG B.7 so that the upper hook of the armrest goes into the upper hole. If
the holes are towards the inside then change the side you are mounting the armrest in and make sure the holes on the side are towards the outside.
11. Still holding the armrest, press down until you hear a "click" sound, indicating that it has been fitted correctly. Repeat the steps for the second
armrest. SEE FIG. B.8.
Double tray adjustment:
12. Press and squeeze the handles on the bottom. SEE FIG. B.9
13. Place the tray against the arms of the chair so that the tray is in contact with the chair. SEE FIG. B.10
14. After squeezing the handles by pulling on the tray, you can adjust its 3 positions, which are marked on the armrest FIG. B.11
15. Always ensure that the tray is locked correctly after mounting or repositioning. Pull gently back and forth so that the tray does not move on the
armrest.
16. The tray has an overlay. To remove or apply the overlay to the tray, pull the side hooks towards the outside gently and then up or down. SEE FIG.
B.12
NOTE: Always pay attention to where your child's fingers are so that they do not hurt them when taking off or putting on the tray cap and tray.
17. Hang the tray on the handles located on the back legs of the chair, under the basket attachment. The holes in the tray are located under the tray
pull handles.
Installation of leg rest and footrest:
18. Take the leg rest, find the hole in the seat and insert the leg rest fixing into the holes of the corresponding positions as shown. SEE FIG. B.13
19. Push the prop stand until the attachment enters fully into the seat and pull gently downwards. Check that the support leg has been secured correct-
ly by pulling gently around both fixings on the support leg.
20. Take the footrest and locate the holes on the footrest SEE FIG. B.14. Apply the footrest at a 45' angle, insert the attachment into the hole and pull
the footrest down. SEE FIG. B.15
Seat height adjustment:
21. Press and hold the seat buttons mounted on the front tubes of the chair with both hands SEE FIG. B.16 and then adjust the preferred height of the
chair by moving both hands up and down. SEE FIG. B.17 Remember that the lowest position of the chair is for storing the chair.
NOTE: Never adjust the height of the seat if your child is sitting on it.
Backrest adjustment:
22. Press the button on the back of the backrest SEE FIG. B.18 and select 1 of the 3 positions. SEE FIG. B.19
Adjustable leg rest:
23. Press and hold the left and right buttons on the leg rest simultaneously SEE FIG B.20 , pull the leg rest up or down to select 1 of 3 positions. SEE FIG.
B.21
12
