Idiomas disponibles
Idiomas disponibles
Lights Combination
FN + A
Toggle Backlight Effects
FN + S
Toggle Backlight Colors
Change Backlight Direction
FN + D
(for partial light effects)
Save Battery mode
FN + F
(all lights off)
FN + ↑
Backlight Brightness +
FN + ↓
Backlight Brightness -
FN + ←
Backlight Speed -
PAIRING BLUETOOTH
1. Toggle the switch to the Bluetooth side, then press Fn+Q/W/E to initiate the Bluetooth mode
2. Hold Fn+Q/W/E for 3-5 seconds till the indicator flashes fast, the keyboard is ready to pair.
3. Turn on your Bluetooth device and find "KIIBOOM64 5.0" or "KIIBOOM64 3.0", then connect. When the keyboard is
connected to the Bluetooth device, the first indicator stops flashing.
4. Press Fn+Q/W/E to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHz
1. Toggle the switch to the 2.4G side, then press Fn+R to initiate the 2.4G mode
2. Hold Fn+R for 3-5 seconds till the first indicator flashes fast, the keyboard is ready to pair.
3. Insert the 2.4G dongle to your device, the first indicator stops flashing green and the connection is done.
Note: The keyboard will enter sleep mode after 2 minutes of inactivity, the keyboard lights go off, and it can be
reactivated by any keypress.
WIRED MODE
Toggle the switch to the wired mode, the keyboard enters to the wired mode successfully.
BATTERY CHECK
Hold Fn+Backspace, the keys from 1 to 0 lights up to show the battery percentage; for example, if the keys from 1 to 6
light up when holding Fn+ Backspace, it means that the battery life is currently 60%; if keys of 1-0light up, battery life is
100%.
FN + →
Backlight Speed +
FN + Z
Bottom Light Brightness -
FN + X
Bottom Light Brightness +
FN + C
Bottom Light Speed -
FN + V
Bottom Light Speed +
FN + B
Toggle Bottom Light Colors
FN + N
Toggle Bottom Light Colors Effects
