Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3

Enlaces rápidos

LEX0330
INSTRUCTIONS / ENGLISH
Functions:
Universal switched power supply
Features 6 outputs and 4 exchangeable travel adaptors: Europe, UK, USA, Australia.
Power: 12W max
Switch-adjustable output voltage 3.0 / 4.5 / 5.0V 2A , 6.0 / 7.5V 1.5A, 9V 1.3A, 12V 1.0A
Input voltage: 100 / 240V – 50/60Hz
Output current: 1A - 2A
Precautions:
1/ Do not use outside; do not expose to dust, fire or heat; do not get wet or moist; do not dismantle or
open (take it to a qualified repair technician). Do not cover while using.
2/ Keep out of reach of children; do not insert metal objects (screwdrivers, wires...).
3/ Keep in a dry place and do not use with wet or moist hands.
4/ Do not use if the power supply has been damaged.
5/ Do not change the output voltage when the power supply is connected to the mains and when your
application is connected to the power supply.
6/ Do not short-circuit or reverse the polarity.
Instructions:
1/ Before connecting the power supply to the mains, adjust the output voltage so it corresponds to the
application voltage.
2/ Verify that the current needed to operate your application corresponds to the current delivered by the
power supply: see the table above.
3/ Select the output plug that corresponds to the size of your application connection.
4/ Make sure the polarity shown above the plug corresponds to the application polarity (refer to the indi-
cations directly on your application or in the corresponding instructions) by aligning the arrows on the
connectors as shown in the diagram below. Then connect the plug to the power supply adaptor cord.
MORE TO THE CENTRE
5/ Connect the power supply to the 100 - 220 V mains socket, then connect the power supply plug to your
application. Start your application.
6/ If the application malfunctions, check whether the polarity has been reversed.
7/ Disconnect the power supply from the socket after use, then disconnect the power from your appli-
cation.
Imported by Enix Energies - 27 rue des Glairaux - 38120 Saint-Egrève - FRANCE - www.enix-energies.com
LESS TO THE CENTRE
loading

Resumen de contenidos para ENIX ENERGIES LEX0330

  • Página 1 6/ If the application malfunctions, check whether the polarity has been reversed. 7/ Disconnect the power supply from the socket after use, then disconnect the power from your appli- cation. Imported by Enix Energies - 27 rue des Glairaux - 38120 Saint-Egrève - FRANCE - www.enix-energies.com...
  • Página 2 6/ If the application malfunctions, check whether the polarity has been reversed. 7/ Disconnect the power supply from the socket after use, then disconnect the power from your appli- cation. Imported by Enix Energies - 27 rue des Glairaux - 38120 Saint-Egrève - FRANCE - www.enix-energies.com...
  • Página 3 7/ Desconectar la fuente de alimentación de la red cuando haya terminado de usarla y, después, des- conectar la fuente de la aplicación.. Imported by Enix Energies - 27 rue des Glairaux - 38120 Saint-Egrève - FRANCE - www.enix-energies.com...
  • Página 4 6/ Se l’applicazione non dovesse funzionare correttamente, controllare che la polarità non sia invertita. 7/ Scollegare la fonte di alimentazione dalla rete dopo l’uso e scollegare la fonte dall’applicazione. Imported by Enix Energies - 27 rue des Glairaux - 38120 Saint-Egrève - FRANCE - www.enix-energies.com...
  • Página 5 6/ Im Falle einer Störung Ihres Geräts, überprüfen Sie, ob die Polarität nicht umgekehrt wurde. 7/ Das Netzteils nach Benutzung vom Netz nehmen, und danach das Netzteil von Ihrem Gerät trennen. Imported by Enix Energies - 27 rue des Glairaux - 38120 Saint-Egrève - FRANCE - www.enix-energies.com...
  • Página 6 6/ No caso de ocorrer qualquer falha de funcionamento da aplicação utilizada, verificar que a polaridade não esteja invertida. 7/ Desligar a fonte de alimentação da rede quando acabe de utilizá-la e, depois, desligar a fonte da aplicação. Imported by Enix Energies - 27 rue des Glairaux - 38120 Saint-Egrève - FRANCE - www.enix-energies.com...