Idiomas disponibles
Idiomas disponibles
HAND WRING CLOTHS TO REMOVE EXCESS LIQUID. CLOTHS
SHOULD BE DAMP, BUT NOT DRIPPING. THE CDR IS NOT
DESIGNED FOR SPRAY DOWN OR POURING OF LIQUIDS ONTO
MECHANISM. PERMANENT MACHINE DAMAGE MAY RESULT.
1. Disconnect/unplug CDR from power.
2. Remove the safety cover by removing the four thumb screws.
3. Remove all scrapers (SEE PREVIOUS PAGE).
4. Clean the rolls, infeed/output trays and scrapers by:
a. Dampen a clean cloth in soapy water, wash all plastic surfaces.
b. Using a different clean cloth, dampen with clean/clear water and rinse
all surfaces.
c. Dampen a clean cloth with sanitizer, sanitize all surfaces.
d. Allow all food contact surfaces to air dry.
e. APPLY A THIN FILM OF COOKING OIL WITH A CLOTH.
5. Brush or wipe the sides of the machine and the trays.
6. Clean all the scrapers and verify they are not worn.
7. All beveled edges should be smooth and not nicked.
8. Install the scrapers in the opposite order of removal.
9. Close the safety cover and secure it with the four thumb screws.
10. Reconnect/plug into power.
11. Press the green start button when the machine is ready to use.
•
Equipment food-contact surfaces should be clean to sight and touch.
THIS MACHINE IS MAINTENANCE FREE!
NEVER USE OIL OR GREASE ON ANY OF THE PARTS OF THE
MACHINE!
ALL PARTS ARE PERMANENT SELF LUBRICATED!
L020-030
WARNING
CLEANING
CAUTION
PAGE 4 OF 5
REV B – JULY 2019
