Installation (English); Before You Begin - USRobotics USR997930 Guia De Instalacion

Installation
Package Contents:
8-Port 10/100/1000Mbps Switch
-
U.S. Robotics
8-Port 10/100/1000Mbps Switch
LEDS
Power
SPD/LNK/ACT 1-8
(Each LED corresponds
with a LAN port on the
front.)
FDX/HDX 1-8
Port
LAN Ports 1 through 8
100-240 VAC

Before You Begin

Note: For more information, you can also refer to the Support section of the U.S. Robotics
Web site at http://www.usr.com/support
Note: Your model number is 7930. It is important that you have your serial number written
down before you install the 8-Port 10/100/1000Mbps Switch. You can find your serial
number on the bottom label of the 8-Port 10/100/1000Mbps Switch and on the side of the
package. If you ever need to call our Technical Support department, you will need this number to
receive assistance.
- Quick Installation Guide
Power
Color - Action
Solid Green Receiving power
Off Not receiving power
Solid Green 1000 Mbps LAN link connection
Blinking Green Sending and receiving data at 1000 Mbps
Solid Orange 10/100 Mbps LAN link connection
Blinking Orange Sending and receiving data at 10/100 Mbps
Off No link or 10 Mbps connection
Solid Green A full-duplex link connection
Blinking Green A half-duplex link connection
Off Collisions are occurring on the port when operating in the
half-duplex mode
Used to connect Ethernet devices to the switch.
For the power cord of the 8-Port 10/100/1000Mbps Switch.
-3 power cords
1 2 3 4 5
SPD
LNK
ACT
FDX
HDX
Function
6 7 8
Function
1