Westward 10F638 Instrucciones De Operación Y Manual De Piezas

Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could
result in personal injury and/or damage to product or property. Please retain instructions for future reference.
Unpacking
After unpacking unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing,
or damaged parts. Shipping damage claim must be filed
with carrier.
Read These Instructions Before Assembly
Your spreader is designed to be operated at five miles per hour. Slower or faster speeds will change the spread
patterns. Wet spreading material will also change the spread pattern and flow rate. Clean your spreader thoroughly
after each use. Wash between the shut off plate and bottom of the hopper.
Ensure that the impeller is turning clockwise. Reversing the wiring leads will cause the impeller to turn counter
clockwise. Clean the impeller plate after each use. Spreading material stuck on the impeller blades will cause uneven
spreading.
Gears are permanently lubricated at the factory. Do not open or dirt may enter.
General Safety Information
Make sure you are appropriately dressed, including
sturdy footwear. Protect yourself by wearing gloves
and a dust mask when handling chemical lawn
products that contain pesticides and herbicides.
YTL837
Printed in China 05/11
80Lb. ATV Broadcast Spreader
Assembly
Before assembling this spreader, you need to have
the following tools:
1. A pair of pliers
2. Adjustable Wrenches
3. Phillips Screw Driver
10F638