Idiomas disponibles
Idiomas disponibles
Original-Bedienungsanleitung FUXTEC CTL900_de_en_fr_ ita_es_rev04
_________________________________________________________________________________
3.10 Maintenance and care
The product should be checked and cleaned regularly.
Please regularly check all essential parts for damage. Make sure that the mechanical
–
components are working correctly.
Please regularly check that all screws, rivets, bolts and other fastenings are tight.
–
Do not use grease or oil for lubrication, but a silicone-based spray.
–
Too heavy a load, improper folding or the use of unauthorised accessories can damage or
–
destroy the wagon.
–
Never load more than 5 kg into the rear bag.
Store the folded wagon only in a well-ventilated place to prevent mould growth.
–
–
The textile parts may lose colour if exposed to heavy use over an extended period (e.g.
intensive sunlight); however, this does not constitute a reason for complaint.
–
Do not use the wagon if parts are bent, worn or broken.
Do not use accessories that have not been approved by FUXTEC GmbH for use with the CTL
–
900.
Step 2:
Loosen all velcro fasteners and press
buttons at the front and back of the
wagon.
Step 3:
Open all velcro fasteners on the
underside of the wagon. Afterwards,
you can remove the loose fabric
cover from the frame.
30
