Whalen Furniture SM3FCFT Instrucciones De Ensamble página 3

Quality Statement
Question or Comments? We would love to hear about your experience!
Visit us at: Samsclub.com
Important Safety Information
 Please read all instructions carefully before assembling this product.
 Where applicable, and for your safety, assembly by an adult is strongly recommended.
 Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware could jeopardize
the structural integrity of the item.
 Hardware may loosen overtime. Periodically check that all connections are tight.
 NOTE: To prevent injury and property damage from unexpected tipping of furniture, we highly recommend
installation of the anti-tip kit included with this product.
Before Assembly
 Remove all parts and hardware from the box. Place all items on a carpeted or scratch-free work
surface, as this will avoid damaging parts during assembly.
 The shipping box can provide an ideal work surface if none is available.
 Use the components and hardware lists below to identify, inventory and separate each of the
hardware and components included.
 To avoid accidentally discarding small components or hardware, do not dispose of any packaging or
contents of the shipping carton until assembly is complete.
 DO NOT USE power tools unless it is explicitly identified in this manual as required for use during
assembly. Power tools can damage the fasteners, hardware and/or components.
 Do not fully tighten all fasteners / screws until all parts are in place. Failure to follow these instructions
may cause the fasteners / screws to misalign during assembly.
Care & Use

Metal will rust if the finish is scratched or if your furniture is exposed to excessive humidity,
particularly in salt water locations.

Most metal furniture has a protective coating to prevent rust, however rust may occur if the finish is
marred or wears away over time.

For everyday cleaning, chrome, brass, aluminum, and painted metal surfaces can be kept looking their
best by wiping with a slightly damp, soft cotton cloth, or vacuum cleaner brush.

Do not use any harsh abrasives or chemicals to clean any metal surfaces as it may damage the
protective coating.

Check bolts/screws periodically and tighten them if necessary.
3