Idiomas disponibles
Idiomas disponibles
3. INSTALLATION GUIDELINES
* To use your parent unit and camera unit together, you have to establish a radio link
between them, and the range will be affected by environmental conditions.
* Any large metal object, like a refrigerator, a mirror, a filling cabinet, metallic doors or
reinforced concrete between the baby and parent unit may block the radio signal.
* The signal strength may also be reduced by other solid structures, like walls, or by radio
or electrical equipment, such as TV, computers, cordless or mobile phones, fluorescent
lights or dimmer switches.
* Use of other 2.4GHz product, such as wireless networks (Wi-Fi routers), Bluetooth
systems, or microwave ovens, may cause interference with this product, so keep the baby
monitor away at least 5ft (1.5m) from such products, or turn them off if they cause
interferences.
4. PLACEMENT OF THE BABY MONITOR
The camera can be placed on the desktop or mounted on the wall. Don't place baby monitor on
soft quilts or blankets or in the corners of cupboards, shelves, etc; Keep the baby monitor away
from heat sources such as radiators, chimneys, cookers and direct sunlight; Keep the baby unit
away from TV sets, microwave oven and radios. If interference occurs, move the camera to
elsewhere.
*Place the camera within6 feet (2 meters) of the area being monitored for optimum
performance.
5. GETTING STARTED
5.1 TURN ON THE BABY UNIT:
1. Insert the DC plug of the power adapter into the DC jack in the rear of the Baby Unit.
2. Insert the other end of the power adapter into a suitable electrical outlet.
Note: To prevent any disturbance to children, we have implemented an advanced invisible
night vision light.
.2 TURN ON THE PARENT UNIT:
5
1. Insert the DC plug of the power adapter into the DC jack in the side of the Parent Unit.
2. Insert the other end of the power adapter into a suitable electrical outlet.
3. Press and hold the power key 3 seconds on the side of the parent unit.
4.Once parent unit is on, the power LED will light upand the image will display on the
LCD.
When the product is in use, the antenna needs to be pulled up, so that the signal is the
Note:
best.
5.3 PAIRING THE CAMERA AND PARENT UNITS
The baby unit is pre-registered to your parent unit, just watch your baby from the screen,
enjoy it! If the two devices don't pair, follow the procedure below:
1. Make sure the parent unit has power and the baby unit is plugged in.
(Please check in a dim environment to ensure that the camera is powered.)
2. Enter "Camera" on the screen of the parent unit, and choose to add a camera.
3. When the hourglass icon is displayed on the LCD screen, press the PAIR button on the
back of the baby unit.
The camera icon with "
Note:
"means it is well registered.
33
