Klarstein DRYFY GRAND SMART 55 Manual Del Usuario página 28

EN
24
Emptying the drainage tank
1. Lightly press on the sides of the
tank with both hands and pull the tank
out gently.
Notes
• Do not remove the float from the water tank. The water full
sensor will no longer be able to detect the water level correctly
without the float and water may leak from the water tank.
• If the drainage tank is dirty, wash it with cold or lukewarm
water. Do not use detergent, scouring pads, chemically treated
dust cloths, gasoline, benzene, thinner, or other solvents, as
these can scratch and damage the tank and cause water leakage
• When replacing the drainage tank, press the tank firmly into place with both
hands. If the tank is not positioned properly, the "TANK FULL" sensor will be
activated, and the dehumidifier will not operate.
Continuous water Drainage
The unit features a continuous drainage port .Using a plastic pipe (with an inner
diameter of 11mm); the water in the drainage tank can be continuously drained
out from the continuous port on the unit.
2. Discard the collected water