Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Safety
WARNING!—When using the machine, the safety
rules must be followed. For your own safety and
bystanders, please read these instructions before
operating the machine. Please keep the
instructions safe for later use.
It is essential that you or any other operator of
the appliance read and understand the contents of
this manual before operating the appliance. Pay
particular attention to the safety alert symbol
which means CAUTION, WARNING or
DANGER—personal safety instruction. Read and
understand the instruction because it has to do with
safety. Failure to comply with these instructions
may result in personal injury, risk of fire, or
electrical shock.
The following safety information has been adapted
from European Standard EN 786:1996 and
EN 60335-2-91:2002:
Be familiar with the controls and proper use of the
•
machine.
•
Wear protective glasses or goggles.
•
Never allow children or people unfamiliar with the
instructions to use the machine.
•
Stop using the machine while people, especially
children, or pets are nearby.
•
Only use the machine in daylight or good artificial
light.
•
Before using the machine and after any impact,
check for signs of wear or damage and repair as
necessary.
•
Never operate the machine with damaged guards
or without the guards in place.
•
Keep hands and feet away from the cutting
means at all times and especially when switching
on the motor.
•
Take care against injury from the line cutting
blade on the underside of the trimmer. After
installing new line, always return the machine to
its normal operating position before switching it
on.
•
Never use metal cutting elements.
•
Do not carry a plugged-in trimmer with your finger
on the switch. Ensure that the switch is off when
plugging in the trimmer.
•
Disconnect the machine from the power source
before checking, cleaning, or working on the
machine and when it is not in use.
•
Always ensure that the ventilation openings are
kept clear of debris.
•
Before use, check the supply and extension cord
for signs of damage or aging.
E 2005—The Toro Company
8111 Lyndale Ave., Bloomington, MN 55420, USA
•
If the cord becomes damaged during use,
disconnect the cord from the power supply
immediately. Do not touch the cord before
disconnecting the power supply.
Do not use the machine if the cord is damaged or
•
worn.
•
Warning, the cutting element continues to rotate
after the motor is switched off.
Keep extension cords away from the cutting
•
element.
•
The power supply used with the appliance should
be a residential current device (RCD) with a
tripping current of not more than 30 mA.
The machine weighs 2.4 kg.
•
•
After use, check the machine for damage.
•
When not in use, store the machine away from
children.
•
If the trimmer requires repair, take it to an
Authorized Toro Dealer.
•
Use only Toro replacement parts and
accessories.
Sound Pressure
This unit has a maximum sound pressure level at the
operator's ear of 82.5 dBA, based on measurements
of identical machines per EN 11201 and ISO 11094.
Sound Power
This unit has a guaranteed sound power level of
96 dBA, based on measurements of identical
machines per EN 3744 and ISO 11094.
Vibration, Hand/arm
This unit does not exceed a hand/arm vibration level
2
of 6.54 m/s
, based on measurements of identical
machines per EN 1033.
Safety/Instruction Decals
Important: Safety and instruction decals are located
near areas of potential danger. Replace damaged or
lost decals.
3352-875
106-6490
Printed in the USA
All Rights Reserved
Tabla de contenido
