Idiomas disponibles
Idiomas disponibles
SET UP AND OPERATION
WARNING
–
USE THIS AIR CIRCULATOR WITH ANY SOLID-STATE SPEED CONTROL DEVICE.
1. For easy mobility, the air circulator comes with a telescopic handle and wheels. To
extend the handle, simply push in the metal button and pull outward on the end of the
handle until it clicks into place.
2. To use the unit, place it in the area most suitable for your application. Several factors
need to be considered; the unit must have enough clearance on each side of unit to allow for proper
airflow. The unit should not be placed where it can become a tripping or safety hazard.
3. Plug the unit into the wall.
4. Turn unit on and select air speed by turning switch, located on the top of the unit.
5. When you no longer need the unit, turn the unit off and follow the instructions for storage in this manual.
OPTIONAL FILTERS AND ACCESSORIES
There are filters and accessories available for the air circulator that may be purchased at your local dealer
or Shop-Vac
website. These items do not come standard with your unit.
®
FILTERS
The available filters install on the intake end of the air circulator to prevent dust from being drawn into
the unit and exhausted into the air. To use the filters, you will need to purchase the filter kit containing the
mounting ring. NOTE: Filters are not required in areas where the dust content is low.
WARNING
–
DEPENDENT ON THE FILTER. A CLOGGED FILTER CAN CAUSE OVERHEATING AND POSSIBLY
DAMAGE THE UNIT. CHECK THE FILTER PERIODICALLY AND REPLACE AS REqUIRED.
ACCESSORIES
The multi-directional airflow adaptor allows you to direct the flow of the air in several different directions.
There is also a flexible air duct adaptor that allows you to send the air into a concentrated space. The
loading dock air circulating kit forces cool air into a trailer and warm air out.
NOTE: This unit cannot be used with the wall mounting bracket or mobile floor mounting bracket.
WARNING
–
ACCIDENTALLY STARTING, UNPLUG POWER CORD BEFORE CLEANING.
The outside of the unit may be cleaned with a damp cloth to remove any dust or residue.
USER SERVICING INSTRUCTIONS
WARNING
–
ATTEMPTING TO SERVICE OR REMOVE ANY COMPONENTS.
Do not attempt to service your air circulator beyond that described in the user manual. For all other
servicing, follow instructions under Warranty Section.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
KEEP FILTERS CLEAN. EFFICIENCY OF THE UNIT IS LARGELY
CLEANING
TO REDUCE THE RISK OF INJURY FROM THE AIR CIRCULATOR
BE SURE TO DISCONNECT POWER SUPPLY BEFORE
PAGE 5
