MODE SELECTION / MODUS AUSWÄHLEN / SÉLECTION DE MODE / SELECCIÓN DEL MODO /
WYBÓR TRYBU / SELEZIONE DELLE MODALITÀ
EN
NOTE
When the projector is properly connected to the mains, the following information appears successively in the display during the startup process:
"Software Update, Please Wait..." (for service purposes only), the software version "Software V1.xx" and "WELCOME TO cameo". After this operation,
the projector is ready for use and changes back to the mode that was previously selected.
STATIC COLOUR
Press the MODE button to select the Static Colour Mode. C000, then press the ENTER button to choose one of the static colours using the UP and
DOWN buttons. The C1 represents Red, C2 = Green, C3 = Blue, C4 = White and CF = strobe. The two digits after it are the brightness 00 to 99 or in
CF they are the strobe speed.
Examples: If you set C1, C2, C3 and C4 to zero, the Quad Par Can will have no LEDs on (blackout). If you set C1 to 99 and C2, C3 and C4 to zero, the
colour will be 100% Red. Press ENTER to confirm.
RED
Brightness C100 - C199
GREEN
Brightness C200 - C299
COLOUR MACRO MODE (15 COLOURS)
Press the MODE button (repeatedly, if necessary) to select the "Colour Macro" mode (CMXX). Confirm with ENTER and then use the UP and DOWN
buttons to select the desired colour. Confirm with ENTER.
1. Red
2. Green
3. Blue
4. White
5. Yellow
6. Cyan
7. Lavender
8. Pink
9. Bright Green
10. Magenta
11. Turquoise
11. Pale Pink
12. Amber
13. Bright Magenta,
14. Pale Cyan
15. Warm White
BLUE
Brightness C300 - C399
WHITE
Brightness C400 - C499
STROBE
Speed CF00 - CF99
13
