Idiomas disponibles
Idiomas disponibles
Camera installation
Please follow these steps:
1.Place the camera base in
the desired position on
the wall and using a
pencil mark the four
holes on the base as
shown below.
2. Drill holes on the marked
spots using a drill and
then place an anchor on
each hole.
3. Place back the camera
base and x it to the wall
using the screws.
4. Place the camera on the
base making the slots
match the base aps.
5. Fix the camera on the
base using the provided
camera screw locks, as
shown below.
IMPORTANT NOTE:
Charge the camera with a 5V/1A
power adapter for at least two
hours before proceeding to its
installation, so as to ensure
maximum battery charge during
its rst use.
Slot
Slot
