Adesso Braxton 4250 Instrucciones De Ensamblaje

Please visit our website or scan QR
code to view a Video on assembling
our patent pending No Tools Arms
A note on packaging:
Due to the fragile nature of this product, we have
chose to use Styrofoam only where it is needed to
protect it and deliver the best quality product to
our customer. We are aiming to reduce the use of
plastic and styrofoam in the packaging of our
products where possible and are investigating
more environmentally friendly alternatives to use.
We hope you enjoy your purchase!
Assembly Instructions (English)
ASSEMBLY INSTRUCTION FOR
Braxton 3-Arm Arc Lamp
Model# 4137-22 / 26
Please begin assembly by laying all parts down on the ground. The arms
are easiest to assemble if you assemble them first, before they are
attached to the lamp body.
1. Assemble arc arms (A),(B) and (C) by placing the top arc tube into the
bottom arc tube and securing each arm by tightening each metal collar
joint (D). Simply slide joint (D) over the threaded tube and screw down
to tighen. If you have trouble here, slightly lift up the upper arm to
relieve the tension on the joint while screwing the parts together.
Attention: Be sure to align the consistency of the curve on each arm.Do
not tighten the metal collar joints all the way yet. This way, when you set
the arms onto the base later, you can get the arm curves perfect and
then tighten the joints.
2. Fold the excess cord and insert into tube (F).
3. Place part (E) into tube (F), then tighten it with screw (G) .
Note: The Arc lamp should face forward with the arms reaching
over the base (see diagram below).Now you can make sure the arm
curves are aligned and tighten the joints.
4. Screw tube (F) and (H) together until tight
5. Insert tube (H) to base (I) & washer (J), then tighten it with nut (K)
using wrench (L). You may need to pull any excess cord gently through
the base.
6. Socket rings(N) comes pre-assembled to the sockets. Before placing
the shade onto the socket, please unscrew this socket ring.
7. Place shade (M) onto socket and tighten it with socket ring (N).
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to reduce the risk of
electric shock (one blade is larger than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.Do not
use with an extension cord unless the plug can be fully inserted.
ALTER THE PLUG .
----------------------------------------------------
BULB TYPE :
Use only with maximum of 3*60 watt incandescent
bulbs or 3*13W CFL bulbs. (bulbs not included) Must use all
incandescent or all CFL bulbs.
PARTS DIAGRAM
(1) * Screw (G)
4137-22
th nd
353 West 39 Street 2 Floor New York, NY 10018
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
1.0
DO NOT