Idiomas disponibles
Idiomas disponibles
Solving Common Problems
Before contacting an authorized service center, perform the following simple checks.
They may save you the time and the expense of an unnecessary call.
Problem
Explana_on / Solution
The air conditioner
aoes no_ ooerate at all.
•
Check for a power failure.
•
Check the voltage.
(See the technical specifications)
•
Check the power plug for disconnection.
•
Check to see whether the operating mode selection dial is placed in the
"Off" position. (Set it to the desired position.)
•
Check to see whether the room temperature is too low.
- Refer to page 10 for details about temperature condition.
The air comes out smoothly,
but cooling is not effective.
•
Set the THERMOSTAT control to the desired position.
- When the number on the THERMOSTAT control is too high,
the room temperature may be too warm.
•
Check to see whether there is an open window or leakage of cool
air to the outside.
- Close the window, and fill the gap.
•
Check to see whether there is any obstacle adversely affecting
the flow of the air inside and outside the room.
- Remove the obstacle or change the position of the air conditioner.
•
Check to see whether the air filter is clogged with dust or
contaminated with foreign substances.
- Clean the air filter.
•
Check to see whether there is any direct sunlight facing the air conditioner.
- Block the sunlight with a sunshade.
•
Check to see whether there is any electric device generating heat.
- Do not use the air conditioner together with any heating device.
Odors are permeating the
room during air conditioning,
•
Ventilate the room.
®
