Installation Steps; Package Contents - Axis P8221 Guia De Instalacion

AXIS P8221 Installation Guide
This installation guide provides instructions for installing an AXIS P8221 Network I/O Audio
Module on your network. For all other aspects of using the product, please see the User's Manual
on www.axis.com

Installation steps

Follow these steps to install AXIS P8221 on your local network (LAN):
1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 5.
4. Assign an IP address. See page 6.
5. Set the password. See page 9.

Package contents

Item
Network I/O Audio Module AXIS P8221
Indoor power supply
(country specific)
Terminal block connectors
Mounting kit
Printed Materials
AXIS P8221
Installation Guide
Models/variants/notes
Europe/UK, Australia, USA/Japan, Argentina, Korea
• Audio: 5-pin connector
• I/O: Two 6-pin connectors
• Power: 3-pin connector
• RS-232/485/422: 5-pin connector
• 2 screws and plugs to mount the device to a concrete wall
• 4 surface protection pads
AXIS P8221 Network I/O Audio Module Installation Guide (this document)
Axis Warranty Document
Extra serial number label
Important!
This product must be used in
compliance with local laws and
regulations.
Page 3