Idiomas disponibles
Idiomas disponibles
Read these instructions and this manual
in its entirety before you attempt to
assemble or operate your new lawn
mower.
IMPORTANT:
This lawn mower is shipped
WITHOUT
OIL OR GASOLINE
in the
engine.
Your new lawn mower has been as-
sembled at the factory with the exception
of those parts left unassembled
for
shipping purposes.
To ensure safe and
proper operation of your lawn mower, all
parts and hardware you assemble
must
be tightened securely.
Use the correct
tools as necessary to ensure proper
tightness.
All parts such as nuts, wash-
ers, bolts, etc., necessary to complete the
assembly have been placed in the parts
bag.
TO REMOVE
LAWN
MOWER
FROM
CARTON
1. Remove
loose parts included with
mower.
2.
Cut down two end corners of carton
and lay end panel down flat.
3.
Remove
all packing materials except
padding between upper and lower
handle and padding holding operator
presence control bar to upper handle.
4.
Roll lawn mower out of carton and
check carton thoroughly for additional
loose parts.
HOW TO SET UP YOUR LAWN
MOWER
TO UNFOLD
HANDLE
IMPORTANT:
Unfold handle carefully so
as not to pinch or damage control cables.
1. Raise handles until lower handle
section locks into place in mowing
position.
2. Remove
protective padding,
raise
upper handle section into place on
lower handle and tighten both handle
knobs.
3. Remove
handle padding
holding
operator presence
control bar to upper
handle.
Your lawn mower handle can be adjusted
for your mowing comfort.
Refer to
=ADJUST
HANDLE"
in the Service and
Adjustments
section of this manual.
Operator
control bar
LIFT
UF
Mowing
position
Lower handle
TO INSTALL
ATFACHMENTS
Your lawn mower was shipped ready to
be used as a mulcher.
To convert mower
to bagging or discharging,
see "TO
CONVERT
MOWER"
in the Operation
section of this manual.
5
