Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1. Begin with the largest Tentacle Base [A] and the
matching Tentacle End [B].
Connect the male plug from the Tentacle End
[B] to the female plug in Tentacle Base [A].
Screw the threaded collar of the male side to the
female end to secure the connector.
2. Insert the Tentacle End [B] into
Tentacle Base
[A]
at the assembly collar. Align the geometry of
the assembly features so that the Tentacle End
[B] can be fully inserted.
Do not pinch the wire between the two parts.
Allow extra wire to fall into
Tentacle Base
[A]
during assembly.
3. Once inserted, rotate
Tentacle End
[B]
clockwise to lock it into place. Once locked, the
outer form should align so that the sculpted
details match between the two parts, like the
image shown in the bottom right corner of the
diagram.
1
B
A
2
A
3
B
A
4
ASSEMBLY INSTRUCTIONS
4. Repeat step one with Tentacle Base [C] and the
matching Tentacle End [D].
Connect the male plug from the Tentacle End
[D]
to the female plug in Tentacle Base
Screw the threaded collar of the male side to the
female end to secure the connector.
5. Repeat Step 2 for Tentacle Base [C] and
Tentacle End [D]. Insert the Tentacle End [D]
into
Tentacle Base [C]
B
Align the geometry of the assembly features so
that the Tentacle End [D] can be fully inserted..
Do not pinch the wire between the two parts.
Allow extra wire to fall into
during assembly.
6. Repeat Step 3 with Tentacle Base [C] and
Tentacle End [D].
RotateTentacle End
clockwise until secure to lock it into place. Once
locked, the outer form should align so that the
sculpted details match between the two parts,
as shown in the image in the bottom right corner
of the diagram.
4
C
[C].
5
at the assembly collar.
C
Tentacle Base [C]
6
[D]
C
5
D
D
D
