Important Safety Instructions; Care Instructions - Williams-Sonoma Donnelly Instrucciones De Ensamblaje

Pottery barn kids – PBteen – Pottery Barn – west elm – Williams Sonoma – Williams Sonoma Home – Rejuvenation – Mark and Graham
10-May -2021
ENGLISH
CAUTION:

BEFORE INSTALLING FIXTURE, MAKE SURE THE POWER TO THE CIRCUIT IS TURNED OFF AT THE MAIN FUSE BOX /
CIRCUIT BREAKER UTILITY BOX.

Important Safety Instructions:


These instructions are provided for your safety. It is very important that they are read carefully and completely before
beginning the assembly and installation of this lighting fixture.

We strongly recommend that a professional electrician install all direct wire fixtures.

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

The wall anchors (A) and Mounting screws (B) are meant for drywall and wooden wall mounting only. If the surface is made from
concrete, brick or plaster, please consult your local hardware store for assistance. Use proper hardware for your wall type.

It is suggested to recommended models of dimmer switches.

The Light Modulator/dimmer switches We Recommend:
LUTRON: DVCL-153PR; MAELV-600.
LEVITON: 6683; DSE06-10Z.

The lighting fixture is meant for indoor/outdoor use. It must be connected only to 3-wire, single-phase electrical supply
systems (provided with Ground wire or equivalent protection system).

For your safety, it is strongly recommended that two people install the lighting fixture.

Small LED input 120VAC 60HZ 16W/ Medium LED input 120VAC 60HZ 24W
The lighting fixture is intended for indoor or outdoor areas. SUITABLE FOR WET LOCATIONS (mounted vertical only).

SUITABLE FOR DRY AND DAMP LOCATIONS (mounted vertical and horizontal).

Read and save these instructions.
WARNING:
Do not touch light emitting diodes (LED's) when fixture is turned on. Do not look directly at lit diodes.

Keep flammable materials away from lit LEDs. 
Pre-assembly:
Remove all parts and hardware from box along with any plastic protective packaging.

Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.

For your safety and convenience, assembly by two people is recommended.


Care instructions

:
• Wipe clean with a soft, dry cloth or static duster.
• Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture's finish.
Williams-Sonoma Inc.
Assembly Instructions
Instructions d'assemblage
Instrucciones de Ensamblaje
2/16
US/CA – A