Idiomas disponibles
Idiomas disponibles
4. If you need to charge (or keep charged) the iOS device while playing,
connect the iRig MIDI Charge port to the charger you normally use
with the iOS device.
IMPORTANT NOTES:
• Always use the included USB to Micro USB cable. Other longer
or lower quality cables may cause the charge to not work.
• If the charger you use with your iOS device is not available, you may
use another compatible USB charger. It must be able to provide the
required charging current for your iOS device, otherwise the device
will not get charged.
• Sometimes a "not charging" message may appear when the charger
is initially connected to iRig MIDI even with the proper charger and
cables. If the charger and cables are correct, the message will be
dismissed, and charging will start after a while.
5. When controlling MIDI compatible apps with external controllers, you
may want the MIDI signal to also go to other external devices at the
same time. In this case, connect the iRig MIDI THRU port to the MIDI
IN port on the additional devices you want to control.
USING THE "iRig MIDI Recorder" App
iRig MIDI Recorder can record and play back any type of MIDI information
whether it is a musical phrase, a data dump or a real-time controller
performance.To start recording, press the RECORD button, and a large
time counter will show the recorded time elapsed. Once the recording
is complete, press the same button again. The list of recordings will
automatically populate at the top of the screen as recordings are
completed. To play back one of the recordings, simply touch them in the
list.
The bottom part of the screen indicates when specific types of MIDI
information – Notes, Control Changes, SysEx, or other messages –
are transmitted or received. Recordings will automatically be organized
by their recording date, and the recording location will automatically be
stored.
To export your MIDI recordings from iRig MIDI Recorder, just press the
EXPORT button at the bottom of the screen, and select the export method
you prefer.
iRig MIDI Recorder will automatically advise you when your iRig
MIDI firmware needs to be updated if this is necessary in the future.
Follow the instructions on the screen to complete this procedure.
TROUBLESHOOTING
If you are sending MIDI to iRig MIDI and no information appears to be
received, check that the red LED located above the MIDI IN port is
flashing. If not, it means either that the wrong MIDI port on the transmitting
device is connected, that there is a communication problem with the
software app, that the Apple device is in sleep mode or that there is a
problem with the MIDI cable.
If you are sending MIDI from an app to an external device and no
information is received, check that the red LED located above the MIDI
OUT port is flashing. If not, it means that the app is not sending MIDI to
iRig MIDI. This could be because the app is not Core MIDI compatible
or because it needs to be closed and re-opened to recognize iRig MIDI.
REGISTER ONLINE
Please visit www.ikmultimedia.com/registration to register your
purchase. By registering your purchase, you can access technical
support, activate your warranty and get free JamPoints.
WARRANTY
Please visit www.ikmultimedia.com/warranty for the complete warranty
policy.
FOR SUPPORT AND MORE INFO:
www.ikmultimedia.com/irigmidi
Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards.
