Idiomas disponibles
Idiomas disponibles
Indicator Analysis
Charging indicator(red)
P
Pairing in Bluetooth
airi
1.Slide the power switch to " ON ", the
1.Sli
1.S
1.Slide the power switch to "
lide
key 3 seconds,the bluetooth keyboard
key 3
seconds,the bluetooth keyboard will en
indicator keep flashing at 0.25 second frequency.
2.Power on the device and select the
2.Power on the device
click it to enter the system preferences list.
3. Click the Bluetooth icon to enter the bluetooth device searching condition.
4.In the bluetooth device searching list,you can find the "Bluetooth Keyboard",
click it to connect .
5.After the device connect the bluetooth keyboard successfully, you can start
to use the keyboard for typing freely.
6.Long press"
6.L
6. 6.Long pres
on
" key 3 seconds,the bluetooth keyboard will enter
2
while the red indicator keep flashing at 0.25 second frequency.
7. 7.Long press" 3
7.Long press"
" key 3 seconds,the bluetooth keyboard will enter
while the red indicator keep flashing at 0.25 second frequency.
8.Follow steps 2-4 to pair additional Bluetooth devices.
2.4G Mode Pairing
Press" 2.4G "key, Switch to 2.4G mode, then long press" 2.4G "key for 3 seconds to
enter to code status, then plug in the receiver, the blue light flashes for a few seconds
and then goes out to indicate successful code matching.
Switching Between Devices
Dual Mode Wireless Keyboard can pair up to 3 different Bluetooth devices and 1 USB interface device.
You will be able to switch between your paired devices by selecting the appropriate
assigned Bluetooth key（" "
Note: The time between switching devices will take approximately 2-4 seconds.
Low Battery Reminder
In connected condition, if the blue indicator keep flashing at 0.5 second frequency,
please use the charging cable to charge the keyboard till the red indicator off .
CapsLock indicator(blue)
Numeric indicator(blue)
1
2
3
2.4G
Num
/
Lock
ON
b
setting
" "
" o
" or "
r
"
1
2
3
13
i.Power indicator(blue)
ii.Low battery indicator(blue)
iii.Pairing indicator(blue)
）.
1
