Idiomas disponibles
Idiomas disponibles
[e]:1_1:::_:I I_'fd g q lt'i i.'llJg_l_q,ln
I
\ WARNING: The operation of any tool can resultin foreignobjects being
propelledinto your eyes, resulllogin severe eye damage.When operating
power toof, always wear safety gogglesor safely glasseswith side shieldsand a
fullface shield when needed.
I
_ WARNING: Remove adjustingkeys or switchesbefore turning the tcol
on.A wrench or a key that is left attached to a rotatingpart of thetool may result
in personal injury.
A_ WARNING: If any parts are missing,de nof operate the tool untilthe missing
parts have been replaced. Doing so could resultin seriouspersonal injury.
ELECTRICAL SAFETY
Fig
4
Double
Insulated
tools am equipped
with • polarized
.1
":
plug (one blade Is wider than the other).Thls
plug wilt
fit in a polarized
outlet only one way. If the ptug does
not fit In the outlet, reverse tbe plug. if if ettll does not
_ _
fit, contact
a quatified
etectricfen
to install a polarized
outlet. Do not change the plug in any way. DouSe
•
insulation eliminates the need fo)"a three wire grounded
power cord and grounded power supply system. (See Fig. 1)
!_
_,
Avoid contact
with grounded
surfaces
such as pipes,
radiators,
ranges and refrigerators.
There is an increased
risk of electric shock if your body is grounded.
Don't expose
power
tools to rain or wet conditions.
A wet power tool wilt increase
the risk of electric shock.
Do not abuse
the cord. Never use the cord to carry the toet, or pull the plug
from an outlet. Keep cord away from heat, oil, sharp edges
or moving parts.
Repfece
damaged
cords immediately.
Damaged cords increase the risk ol electric
shock.When
operating a power tool oulside, use an outdoor extension cord marked
"W-A" or"W".These
cords are rated for outdoor use and reduce the risk of
electric shock.
Replace damaged
cords immediately.
Use of damaged cords can shock, burn or
siectrocule.
If an extension
cord is necessary,
a cord with adequate size conductors should be
used to prevent excessive voltage drop, loss of power or overheating. Always use UL
and CSA listed extension cords.
