~·
Pro100
Glue Gun Features
HIGH OUTPUT HOT MELT GLUE GUN
SAFETY & OPERATING INSTRUCTIONS
·Full four-finger trigger grip for added control and accuracy
• Up to 60 watts of power for improved flow and output
·Insulated removable nozzle
• Dual stands:
Retractable wire stand (by nozzle)
Wide base for added stability
LIMITED WARRANTY
This product is warranted to be free of manufacturer's defects in workmanship and material for
one year, unless otherwise noted on package, beginning from the date of original retail
purchase. This warranty does not cover any damage resulting from accident or misuse. If the
product becomes defective within the warranty period, we will repair it or elect to replace it
free of charge. We will return your product, provided it is delivered, transportation charges
pre-paid to Adhesive Technologies, Inc. at the address below along with proof of purchase.
Repair or replacement as provided under this warranty is the exclusive remedy of the
consumer. Adhesive Technologies Inc., shall not be liable for any incidental or consequential
damages for breach of any express or implied warranty on this product. Any implied warranty
of merchantability or fitness for a particular purpose on this product is limited in duration to
one year from date of purchase.
PRODUCT OVERVIEW
INTRODUCTION
The Pro 100 is truly one of the more versatile guns on the market today! Its high-temperature
capabilities provide quick bonding for many types of projects - from home repairs to home decor.
Solid state temperature control provides fast, dependable melting of glue sticks. Features include
power on light, on-off switch, full 4 finger trigger, 6-foot power cord, and dual stands for added
stability. Enjoy one of the premier hot melt guns from Adhesive Technologies.
GLUE STICKS
·Use only full size (1/2" nominal -.46"/12mm actual) glue sticks with this product
·Hot melt glue sticks bond crafts and most porous materials instantly- faster than most liquid
glues.
• They provide fast, easy high-strength bonding and work better than most liquid glues.
·They also provide high-strength bonding on woods, plastics and most other materials. Quick
setting.
HOT MELT GLUE STICKS NEVER GO BAD AND ARE ODORLESS
Operating Instructions
1. Snap the two ears of the small stand into holes located on front of glue gun housing. Move
stand forward to "rest" position and stand glue gun on flat work surface. The large wire
platform stand slides into the gun base.
2. Unwrap power cord and plug cord into standard household electrical outlet. Slide ON-OFF
switch to "ON" position. Amber indicator light will be illuminated when gun is connected to
power source. Operates on standard household 120V, 60HZ, AC outlet.
3. Insert high-temperature (full-sized) glue stick into gun and allow 3 minutes for gun & stick to
heat up.
4. After gun and stick are heated, move small wire stand to "rear" position. Apply glue to work
pieces with continuous squeezing pressure on trigger. Amount of glue released onto work piece
is determined by amount of pressure applied to trigger. Release trigger to stop glue flow.
5. Apply even pressure to work pieces for complete bonding.
6. Do not attempt to remove unused glue from the gun after use. Any unused portion of the glue
stick can remain in the gun and be re-heated for use later.
NOTE: Always practice gluing on scrap work pieces before final gluing on projects
Please read all the safety instructions carefully and
save this owner's manual for future use
·ALWAYS WEAR SAFETY GLASSES when operating electric tools. Use of electric tools can cause severe eye injury.
Wear proper safety glasses, goggles, or a face shield when operating this tool.
•DO NOT TOUCH heated nozzle of the glue gun or melted glue. Operating temperature of the nozzle and melted
glue is 380° (193°() and will burn skin.
·KEEP OUT OF THE REACH OF CHILDREN. Keep children and visitors out of the reach of operating glue gun and
cord.
• DO NOT LEAVE the glue gun plugged into an electrical outlet or in a hot condition when unattended.
·KEEP WORK AREA CLEAN, organized and well-lighted. Cluttered work areas invite injuries. Work environment
should be clean, dry and free of any flammable materials.
•DO NOT USE the electric glue gun in damp or wet locations. The glue gun is for use in dry, indoor areas only.
•DO NOT ABUSE the glue gun's power cord. Do not pull cord from electrical outlet or carry the glue gun by its cord.
~DO
NOT LAY the glue gun on its side when it is hot. Always use wire stand
to
keep hot nozzle and glue gun
housing away from surface.
•UNPLUG THE GLUE GUN after use and let cool before storage. After glue gun has air cooled to touch, store in dry
area.
·DO NOT EXPOSE glue gun to heat, oil, sharp objects or other abuse.
•STAY ALERT. Use common sense, do not use the glue gun when you are tired or under the influence of alcohol or
any medication.
·USE ONLY full size (1/2"nominal -.46"/12mm actual) glue sticks in this glue gun.
•DO NOT APPLY oil base paint or stain to hot melt glue.
