Idiomas disponibles
Idiomas disponibles
Installation
1
Marking the mounting location
Remove the set screw (DD) from the base of the
product posts.
Place the product in the desired mounting
location, using a level to position it accordingly,
and use a pencil to lightly mark the outline of the
posts.
Center the mounting brackets (BB) within the
marked post locations, and mark where the
screw holes will be drilled.
Repeat this step as needed for each bath
accessory.
NOTE: The included template (EE) may be used to mark the
mounting locations for the towel bars: A and D for the 24
in. towel bar.
3
Installing the product
Place the post over the mounting bracket (BB)
and secure it with the set screw (DD), as shown.
Repeat this step for the remaining bath
accessories.
NOTE: Ensure the towel bar (B) is inserted prior to
securing the second post to the mounting bracket (BB).
DD
BB
2
Installing the mounting brackets
Drill 1/4 in. holes in the previously marked
locations.
Fasten the mounting brackets (BB) to the wall with
the wood screws (AA).
Repeat this step as needed for each bath
accessory.
NOTE: When mounting the products to a wood wall, fasten
the mounting brackets (BB) to the wall using the wood
screws (AA). There will be no need for drilling or plastic
anchors (CC).
12
l P
a e
e s
c
n o
a t
t c
800-00-4663-3
CC
AA
BB
BB
AA
BB
DD
H
O
M
D E
P E
T O
C .
O
f
r o
u f
t r
e h
a r
s s
s i
M.MX
a t
c n
. e
