Idiomas disponibles
Idiomas disponibles
Remote Control
"
" : Power Button
1
Press to power on / Hold for 3 seconds to
power off.
"
" : ARC
2
Press to switch to HDMI ARC channel.
": BT
"
3
Press to switch to BT channel and enter
pairing mode.
Hold for 3 seconds to disconnect current
device and choose to connect to a new
device manually on your mobile phone /
PC / TV (BT ID: Poseidon D50).
"
": OPT
4
Press to switch to OPTICAL channel.
"
": AUX
5
Press to switch to AUX channel.
"
": EQ
6
Press to switch among Movie, Dialogue,
Music mode, the display will show:
"Eq 1", "Eq 2", "Eq 3".
"
": USB
7
Press to switch to USB channel.
3 CONNECT TO TV VIA ARC
eARC/ARC
HDMI
Steps 1:
Connect one end of the HDMI cable to the
eARC / ARC port on the back of your TV.
Note: Please turn on the "CEC" function on your TV.
When ARC is connected, your TV remote control can control the soundbar and TV simultaneously:
Turn on/off
Adjust the volume
1
2
If there is no sound: try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM
4 CONNECT TO TV VIA OPTICAL / AUX
OPTICAL
OPTICAL
OPTICAL
OPTION 1: OPTICAL
Make sure the TV's port is OPTICAL OUT, connect both sides
1
of the cable to OPTICAL, for both the TV and the soundbar.
Make sure the optical plug is inserted correctly as it shows in the
2
picture. Do not insert the plug upside down and break the optical.
Note: If audio is playing from the internal TV speakers, mute or
minimize the TV volume.
In Optical Mode: If there is no sound, try setting the TV audio output to PCM: TV Settings > Home > Settings > Sound > Digital Audio Output > PCM
02
1
2
3
5
8
10
9
13
14
15
ICAL
USB
ARC
Steps 2:
Then connect the other end to the ARC
port of the soundbar.
DIGITAL AUDIO
OUT
OPTICAL
8
9
4
10
6
7
11
12
11
12
13
14
15
ARC
SUB
Connect the 3.5mm to RCA Audio Cable to your TV's AUDIO
1
OUT port.
Not support AUDIO IN port on TV.
2
Note: Please remember to unplug the AUX cable from TV and
Soundbar when you want to switch to other mode.
"
": Volume Up
"
": Volume Down
": Previous
"
For BT and USB mode only:
Skip to previous track.
"
": Next
BT and USB mode: Skip to next track.
"
": Play/ Pause
For BT and USB mode only.
USB mode: Hold for 3 seconds to
switch between single loop
playback and list loop playback.
"
": SURROUND
Press to adjust surround sound level,
the display will show:
"ST-1", "ST 0", "ST 1".
"
": BASSMX
Press to adjust bass level, the display
will show: "BS-1", "BS 0", "BS 1".
"
": Mute / Recover the volume.
Steps 3:
Press "ARC" button on the remote control
to select "ARC" input.
AUX
AUDIO IN
R
L
AUDIO OUTPUT
R
L
AUX
OPTION 2: AUX
