Technical Data - VOSS.farming easyCUT go Instrucciones De Uso

Clipper head gets
very hot
Blades cut badly
Blades do not cut
If your problem is not listed here, or continues to exist, please feel free to contact our
customer service.

10. TECHNICAL DATA

Clipper
Voltage
Motor power
Cutting speed
Max. ambient temperature
Max. humidity
Battery module
Type
Voltage
Capacity
Battery charger
AC input
DC output
Operating temperature
24
· blade tension too
high
· blades and/or eccent-
ric run dry
· blades are blunt
· blades are badly
sharpened
· blade tension too low
· blades have rust
· eccentric defective
· defective reduction
drive
· clipper head knocked
out
· have it replaced by a specialist work-
shop
· have blades sharpened by a
specialist workshop
· have blades sharpened by a
specialist workshop
· increase tension by tightening the
tensioning nut
· have blades sharpened by a speci-
alist workshop or if too much rust
replace the blades
· have it replaced by a specialist work-
shop
12,0 V/DC
180 W (input/ rated power)
approx. 2600 double strokes / min
0° C – 40° C
10 % - 75 % (relative)
Lithium-Ion battery
12,0 V
2000 mAh
100-250 V/AC, 50/60 Hz, 30 W
13.5 V/DC, 1500 mA
0° C – 40° C