Chasing 3B Manual Del Usuario página 3

CHASING Remote Controller 3B
User Manual
EN
V1.0
The Chasing Remote Controller 3B is specifically designed for the CHASING F1. It can control the
movement of F1, the retracting and extending of the underwater camera, photographing and video
recording, and light switch. The built-in 100-meter wireless module increases the remote control
distance of the CHASING F1 to 100 meters. The remote control is used in conjunction with the
mobile phone, supports wired or wireless Wi-Fi connection, and can transmit underwater images to
the mobile phone screen in real time. Equipped with HDMI interface, it can output underwater
images to video equipment such as external monitors, TVs, or video capture cards in real time. The
professional control sticks and buttons are ergonomically designed to comprehensively enhance
your fishing experience.
6
3
9
10
11
12
1. Power switch: turn the remote controller on/off.
2. Power indicator: green light (high battery level);
blue light (medium battery level); red light (low
battery level).
3 Return point setting button: short press to
enable/disable the one-key return point
function, long press to reset the return point.
4. Unlock/lock button: switch the unlocked/locked
state of the CHASING F1. In the unlocked state,
the button light is on and the remote controller
can control the navigation of F1. In the locked
state, the button light is off.
5. Light control button: short press to turn the
infrared light on the CHASING F1 camera
on/off; long press to turn the navigation light on
the CHASING F1 on/off.
6. Left control stick: control the navigation of
CHASING F1. See the navigation posture for
specific operations.
7. Right control stick: the X-axis controls the
navigation of the CHASING F1, see the
navigation posture for specific operations. The
Y-axis controls the ascent and descent of the F1
Underwater camera. Push the control stick all
the way up to trigger the probe to automatically
ascend, and push the control stick all the way
down to trigger the probe to automatically
descend. During the automatic cable retraction
and release process, push the control stick all
the way up or down to stop retraction or
release.
8. Safety buckle: can be used with a safety rope to
prevent the remote controller from falling.
9. Connection indicator: indicates the connection
03
18
7
8
4
5
13
2
15
1
16
status between the remote controller and the
CHASING F1 (flashing: not connected, steady
connected).
10. Wi-Fi 2.4G indicator light: "steady" indicates that
Wi-Fi is working in the 2.4G frequency band.
11. Wi-Fi 5.8G indicator light: "steady" indicates that
Wi-Fi is working in the 5.8G frequency band.
When the Wi-Fi 2.4G and Wi-Fi 5.8G indicator
lights are on at the same time, this indicates that
the remote controller has been bound to the F1
over Wi-Fi. After reset, only one of the 2.4G and
5.8G indicators will light up.
12. Wi-Fi switch/RESET button: short press to switch
between 2.4G/5.8G Wi-Fi on the remote control.
Long press RESET for 5 seconds to unpair the
remote controller and F1.
13. One-key baiting button for bait boat: after
installing the bait boat accessory on the
CHASING F1, press this button to trigger the bait
boat to release baits.
14. Photo/Video control button: short press to take
photos, long press to start/end video recording.
15. Mobile phone/Tablet connection port: a USB port
equipped with a dedicated data cable for the
direct communication between the controller
and the mobile phone/tablet.
16. HDMI output port: 1080P high-definition
real-time image output.
17. Charging port: 4-pin socket, DC 12V.
18. Mobile phone/Tablet bracket: to attach the
mobile phone/tablet, open both ends and insert
the device.
19. Bracket lock button: after fitting both ends of the
bracket around the mobile phone/tablet, press
this button to tighten the device.
Installation and connection
Install the CHASING GO2 App on your
mobile phone
CHASING GO2 App:
(For iOS 9.0/Android 4.4 and above) Scan the QR code
below to download or visit the iOS App Store/Google
Play to download.
Connect your mobile phone to the
remote controller
1. Use the attached mobile phone cable to connect the
mobile phone through the mobile phone/tablet
connection port on the remote control.
2. Open the CHASING GO2 App and tap on the remote
control icon in the upper left corner.
19
3. Select the connection method
between the mobile phone and the
remote control. A USB wired
connection is recommended.
14
4. Follow the instructions in the app to
17
connect the remote control to the
mobile phone with a USB cable.
5. Follow the instructions on the app
to find the F1 Wi-Fi SSID.
6. After entering the Wi-Fi password
(default password 12345678), tap
"Connect", and the 2.4G and 5G
indicators of the remote controller
will light up at the same time.
7. After the connection is successful,
the ROV indicator light will remain
on, indicating that the F1 can be
controlled.
Navigation posture
The F1 has a four-thruster vector layout and can move omni-directionally on the
horizontal plane.
Remote controller
Fish finder drone posture
Left control stick
Right control stick
Remote controller Fish finder drone posture
Left control stick
EN
04