Aqara P2 Manual De Instrucciones página 5

Quick Setup
1. Please make sure you have a Matter-compatible app and
a Matter-compatible Thread Border Router.
2. Remove the insulating tab. The indicator should start
breathing.
Please note: If the indicator is not breathing, press and
hold the reset button for 5 seconds until the LED
indicator starts blinking and release it. The device will
enter the pairing mode.
3. Open the Matter-compatible app and scan the Matter QR
setup code on the manual or package, or enter the Matter
numeric setup code printed on the product to add the
device to the app.
Product Specifications
Motion and Light Sensor P2
Model: ML-S03E/ ML-S03D
Battery: CR2450 × 2
Wireless Protocols: Thread, Bluetooth 5.0
Bluetooth Operation Frequency: 2402-2480 MHz
Bluetooth Maximum Output Power ≤ 13 dBm
Thread Operation Frequency: 2405-2480 MHz
02