Commodore 1084 Modo De Empleo página 4

å 8 8 61
VOLUME JL RGB
SC
HCENTERNG BRIGHTNESS
e The image may be positioned horizontally with knob ©.
e Adjust brightness with knob 4.
e Adjust contrast with knob (P.
e Adjust saturation of colour with knob @® (not with connected RGB sources).
e Adjust sharpness with knob (E) (not with connected RGB sources).
e Adjust volume with knob —.
CVBS/RGB switch
With the CVBS/RGB switch H m you can either choose the CVBS (or LCA) signal (Video
Recorder, Computer or TV Tuner) or the RGB signal (computer).
Controls (rear panel)
EURO CONNECTOR
VCR button
e If you use your monitor as display for your Video Recorder or VLP press button 'VCR' to
adjust the picture.
In case a TV Tuner is connected this button should be released.
V.Height ©
e You can adjust the image height with knob (D.
V.Centering &
e The image may be positioned vertically with knob &.
H.Width ©
e The image width can be adjusted with knob 63.
Technical specifications"
Picture tube : 14 inch, in-line slotted, pitch 0.42 mm,
Deflection : 90?
Monitor input signals on Phono type connection socket
1) Composite video signal with negative :(1V + 0.5 Vpp).
synchronisation Impedance: 75 Ohm
2) Audio signal : (150 mV - 2 Veff).
Impedance: 10 KOhm
3) Luminance signal : (1 V + 0.1 Vpp).
Impedance: 75 ohm
4) Chroma signal :(1 V + 0.1 Vpp).
Impedance: 75 ohm
Monitor input sockets for RGB signals
1) Euroconnector
: RGB linear (see specification)
2) DIN connector
: RGB TTL (see specification)
Resolution : 600 lines in centre, RGB position
Characters : >2000 characters (80 x 25)
in RGB position
Raster frequency : 50/60 Hz
Line frequency : 15625 Hz
Sound output : 1 VV - 5% distortion
Mains voltage 1230 V + 15%
Power consumption : 75 W typ.
Dimensions (h x w x d) : 320 x 350 x 387 mm
Weight :11 kg
* This data may be changed without notice.