Idiomas disponibles
Idiomas disponibles
MAINTENANCE
SCHEDULE
_._ G_ _y _'_/
_" _._
FILL IN DATES
_
_
_._
q.,_
_
_'_ k_
_
_
._'_- _
,_
SERVICE
REGULAR SERVICE
S
Check for Loose Fasteners
I V #
V #
Clean/Inspect Grass Catcher
(If Equipped)
i,/
if
a
Clean Lawn Mower
v'
O
Clean Under Drive Cover
i (Power-Propelled Mowers)
V /
Check drive belt/pulleys
E
(Power-Propelled Mowers)
V'
Check/Sharpen/Replace Blade
I_ 3
LubricationChart
If
Clean Battery/Recharge
Electric Start Mowerst
E Check Engine Oil Level
IV°'
i N
Chan_e Engine Oil
V_1.2
G !
Clean Air Filter
II/' 2
I
Inspect Muffler
I_
N
Clean or Replace Spark Plug
tx
E
Replace Air Filter Paper Cartridge
_2
i/
1 - Change more often when operating unger a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty COnditions.
3 - Replace blades more olten when mowing in sandy soil.
4- Charge 48 hours at end of season.
LUBRICATION
CHART
GENERAL
RECOMMENDATIONS
(_) Engine oil
The warranty on this lawn mower does not
cover items that have been subjected to
operator abuse or negligence.
To receive full
value from the warranty, operator must
maintain mower as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your unit.
All adjustments
in the Service and Adjust-
ments section of this manual should be
checked at least once each season.
• Once a year, replace the spark plug,
replace air filter element and check blade
for wear. A new spark plug and clean/new
air filter element assure proper air-fuel
mixture and help your engine run better
and last longer.
• Follow the maintenance
schedule in this
manual.
BEFORE EACH USE
1. Check engine oil level.
2.
Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRICA-
TION CHART").
I
I
I
(_) Brake spring
bracket
Mulcher
door hinge pin
'(_) Rear
door hinge
(_) Handle bracket mounting pins
(_) Spray lubricant
(_) See "ENGINE" in Maintenance section.
11
IMPORTANT:
Do not oil or grease
plastic wheel bearings.
Viscous
lubricants
will attract dust and dirt that
will shorten
the life of the self-lubricat-
ing bearings.
If you feel they must be
lubricated,
use only a dry, powdered
graphite
type lubricant
sparingly.
