Idiomas disponibles
Idiomas disponibles
1. Turntable Platter
2. Turntable Shaft
3. Tonearm
4. Tonearm Lever
5. Auto-stop Switch
6. Speed Switch
7. Hold Down Clip
8. 45 RPM Adapter
9. Mode Indicator
10. Mode Knob
11. Charging Indicator
12. Power/Volume Knob
13. Headphone Jack
14. LINE OUT Port
15. AUX IN Jack
16. Charging Port
Turntable Operation
1. Rotate the knob to the PHONO mode.
2. Select the desired speed（331/3, 45, 78） and place the record on the platter. (Remark: When playing a
45 RPM record, please use the 45 RPM adapter.)
3. Remove the stylus protector from the stylus. Release the tone arm from the tone arm clip.
4. Use the tonearm lever to raise the tonearm. Move the tonearm gently to the desired position over the
record. Push the lift lever again to slowly descend the tonearm onto the desired position on the record to
start playing.
5. When the record is finished playback, push the tonearm lever again to lift the tonearm. And return the
tonearm to the armrest. Use the tonearm lever to descend the tonearm.
Remark:
-When the Auto-stop switch is "ON," the record will stop automatically when finished. When the Auto-stop
switch is "OFF," the record will not stop automatically when finished.
-Do not touch the stylus tip with your fingers.
Audio Out Operation
The audio Jacks output analog line-level signals and could be connected directly with a pair of active/powered
speakers or the appropriate input of your stereo system.
Note: The Audio Jacks are not designed to be connected directly to the passive/underpowered speakers. If
connected to the passive speakers, the volume level will be very low.
Headphone Operation
This unit can be connected with headphone by headphone jack.
PRODUCT OVERVIEW
-4-
