Aigostar B10311ZIK Manual página 5

1
6
11
Cautions for the LED control device
1.The table lamp for indoor use only.
2.Do not use the lamp in humid environment.
3.Do not wipe the surface of the lamp with acid or alkaline detergent.
4.Do not place the LED control device in direct sunlight or near a heat source.
5.Please do not use multi-functional socket adapter.
6.Do not insert metal pieces or flammable materials into the small gap of the LED control device.
7.Please use the lamp in an environment with good heat dissipation.
8.The LED control device is strictly prohibited to work in a high temperature environment (≥35℃).
9.Do not use the LED control device near inflammable and explosive places.
10.Please unplug the LED control device if not using for a long time.
11.Do not disassemble the product and repair it by yourself.
12.The lamp output wire should not be knotted during use, it should be stretched naturally.
13.Unplug the plug immediately if the lamp emits smoke or an unusual smell.
14.Please do not touch the LED control device with wet hands.
Frequently questions and solutions
The light does not work/does not flash
Possible causes:
1.The power socket is not put through.
2.The LED control device is not properly connected.
3.The DC plug and the DC lamp base are loosely connected.
Solutions
1.Check if the power supply is normal.
2.Check the LED control device has been properly connected..
3.Check the DC plug and the DC lamp base are securely connected.
After checking above problems, if the table lamp still does not work, please do not disassemble the housing
and fix it by yourself but contact with local dealer to repair.
2
7
12
3
8
13
4
9
14
EN
5
10