Idiomas disponibles
Idiomas disponibles
3.4. system menu
Push the Menu button to enter the system menu. Push the Menu button again to toggle through the menu items. The available
menu items are:
3.4.1. load preset
Turn the rotary encoder to select the preset you wish to load. Push the rotary encoder to select it, then turn it again to select
"YES" and confirm again by pushing the rotary encoder knob. The preset is loaded and all settings are applied immediately.
All settings that were in the unit prior to loading the preset will be erased. This action can not be undone. The presets contain
all filter, dynamics, gain settings etc. Presets do NOT contain the name of the unit, network configuration, automatic standby
delay, user access rights and passwords.
3.4.2. save preset
Turn the rotary encoder to select the location of the preset. If that location is not empty, the preset in that location will be
overwritten. This action can not be undone. The system will ask you to give a name to the preset name. Select a character in
the cursor position by turning the rotary encoder; pushing the rotary encoder confirms the character selected and moves the
cursor to the next character to edit. Pushing the exit/ESC button erases the last confirmed character. Once the name is set up,
push the menu button again. If you want to continue storing the preset, select Yes by turning the rotary encoder and confirm
by pushing it. To cancel, push the exit button. Now your preset is saved in the selected location. The presets contain all filter,
dynamics, gain settings etc. Presets do NOT contain the name of the unit, network configuration, automatic standby delay,
user access rights and passwords.
3.4.3. access level
The TEOd9 has the option of locking away the front panel controls to avoid tampering of settings by unauthorized persons.
To lock the unit, select "Locked" by turning the rotary encoder, and push it to confirm. The system will ask you to enter a
password. Select a character in the cursor position by turning the rotary encoder; pushing the rotary encoder confirms the
character selected and moves the cursor to the next character to edit. Pushing the exit/ESC button erases the last confirmed
character. Once the password is set up, push the menu button again and the unit will be locked. ATTENTION: Make sure to
remember the password! When the unit is locked and you forgot the password, it is not possible to unlock it without contacting
your local service representative. To unlock the unit select "Unlocked" and enter the password. The password is automatically
checked after each entered character, and the unit will exit the system menu when the password is confirmed. The default
password is "Password".
Important note: The control application is in User mode once it is strated. In this mode, prests are available in factory mode
only. In order for the user to access and modify prests, it is necessary to log in as Administrator with the password: Ad_min.
3.4.4. version information
By pushing the rotary encoder, the display toggles through some version information about the unit, as well as some parame-
ters like IP address, MAC address etc.
- 17 -
User Manual
