Idiomas disponibles
Idiomas disponibles
About this document
To perform all the steps described here, the Wallbox
must be fully configured and ready for operation. For
information on this, see the Assembly and installation
instructions. For further information, see Additional
information.
Charging a vehicle without authen-
tication (Free-Charging)
No approval is required. Connect the charging cable
and charge: This is the default factory setting.
Prerequisites
Charge level LED (2) is lit in white.
l
Operating / error status Led (1) is lit in white.
l
If the LEDs are not lit, briefly press the button
n
(1).
1. Only for version with socket:
Plug the charging cable into the socket on the Wall-
box.
2. Plug the charging cable into the vehicle connection.
The charge level LED (2) initially pulses white
l
while vehicle identification is in progress.
When the charge level LED (2) is pulsing
l
green, the charging process has been started
successfully.
When charging is complete or the vehicle is
l
fully charged, the charge level LED (2) is con-
tinuously lit in green.
3. If an error occurs, fix the error as described in the
operating instructions.
Display
Charge level LED (2) is lit in red.
Operating / error status LED (1) is lit
in blue, yellow or red.
Connecting to the Wallbox using the
web app
Follow the steps below to use the web app:
1. Keep the access letter to hand.
2. Find the list of available WiFi devices on the laptop,
tablet or smartphone.
Error
type
Charging
error
General
error
11
